PRODUCTS

SOFT-DRAWN BARE

Copper conductors are used in overhead electrical transmission and distribution systems for grounding electrical systems, and where high-conductivity and flexibility are required for equipment and circuit grounding.

THHN / MTW / THWN-2 / T90 SUPERSLICK ELITE®

Type THHN/THWN-2 building wire is intended for general purpose applications as defined by the National Electrical Code (NEC). Type THHN/THWN-2 is permitted for new construction or rewiring for 600-volt applications.

XHHW-2 / RW90 SUPERSLICK ELITE® 600V/1000V

Type XHHW-2/RW90 building wire is intended for general purpose applications utilized in conduit, underground in conduit, or other recognized raceways for services, feeders, and branch-circuit wiring as specified in the National Electrical Code (NEC).

USE-2 / RHH / RHW-2

Type USE-2 or RHH or RHW-2 copper conductors are suitable for use in conduit and raceways installed underground in conduit, wet locations, and where condensation and moisture accumulations within the conduit do not exceed 90˚C.

PHOTOVOLTAIC 600V AND 1000V/2000V

TRACER WIRE 30V AND 600V

THW-2

MTW / AWM / TEW MACHINE TOOL & APPLIANCE WIRE

Type MTW or TEW conductors are primarily used in control cabinets, in machine tool applications, and in appliance wiring applications at temperatures -25°C to 105°C. For use in accordance with the National Electrical Code (NEC) and NFPA Standard 79. Voltage rating for all applications is 600 volts.

TFFN / TFN / TEWN

Type TFFN (stranded) or TFN (solid) conductors are primarily used as fixture wire as defined by the National Electrical Code (NEC) at temperatures not to exceed 90°C in dry locations. For applications requiring Type MTW, the conductor is permitted for use in dry locations at 90°C or not to exceed 60°C in wet locations or where exposed to oils or coolants.

All sizes are rated gasoline and oil-resistant II.

TW-#8 SOLID GREEN

Type TW is suitable for use in conduit or other recognized raceways for services, feeders, and branch-circuit wiring. Suitable for use in wet or dry locations where temperatures do not exceed 75°C.

MC-LED Healthcare™ Cable

Type MC-LED Healthcare (Type MC-PCS) cable is designed for use with LED and Fluorescent dimming systems and power management systems in smart building technology for patient care areas of healthcare facilities to aid in optimal control over the building’s lighting management systems. Type MC-LED Healthcare may be surface mounted, fished and/or embedded in plaster in normally dry locations. Type MC-LED Healthcare eliminates the need to install a separate low-voltage cable and traditional lighting/power MC Cable to a single luminaire in patient care areas in healthcare facilities. Type MC-LED Healthcare complies with NEC Section 517.13(a) and (b). UL Classified for 1, 2 and 3 hour through penetrations (Fire-Stop).

MC-LED™ LIGHTING CABLE THHN/THWN-2 INNERS

MC-LED (Type MC-PCS) cable is designed for use with LED and Fluorescent dimming systems and smart building technology that offers optimal control over the building’s lighting systems. MC-LED may be surface mounted, fished and/or embedded in plaster in normally dry locations. MC-LED eliminates the need to install a separate low-voltage cable and traditional lighting/power MC Cable to a single luminaire. UL Classified for 1, 2 and 3 hour through penetrations (Fire-Stop). Meets acceptable uses in accordance with NEC 250.118(10)(a), 300.22(C), 392, 396, 330, 501, 502, 503, 504, 505, 518, 520, 530, 645 and 725.

MC ALUMINUM ARMOR THHN/THWN-2 INNERS

Available in sizes 14 AWG through 750 KCMIL, Encore’s Metal Clad Cable is constructed with soft-drawn copper, Type THHN/THWN-2 conductors rated 90°C dry locations. Sizes 14 AWG through 1 AWG contain a green insulated grounding conductor. Larger sizes are supplied with a bare ground conductor. All conductors are cabled together with separator tape containing the identification print legend to form the cable core. Interlocked aluminum armor is applied over the entire assembly.

MC STEEL ARMOR THHN/THWN-2 INNERS

MC ALUMINUM ARMOR XHHW-2 INNERS

Available in sizes 14 AWG through 750 KCMIL, Encore’s Metal Clad Cable is constructed with soft-drawn copper, Type THHN/THWN-2 conductors rated 90°C dry locations. Sizes 14 AWG through 1 AWG contain a green insulated grounding conductor. Larger sizes are supplied with a bare ground conductor. All conductors are cabled together with separator tape containing the identification print legend to form the cable core. Interlocked aluminum armor is applied over the entire assembly.

MC STEEL ARMOR XHHW-2 INNERS

Available in sizes 14 AWG through 750 KCMIL, Encore’s Metal Clad Cable is constructed with soft-drawn copper, Type XHHW-2 conductors rated 90°C dry locations. Sizes 14 AWG through 1 AWG contain a green insulated grounding conductor. Larger sizes are supplied with a bare ground conductor. All conductors are cabled together with separator tape containing the identification print legend to form the cable core. Interlocked galvanized steel armor is applied over the entire assembly.

MC-SG (SMARTGROUND™) ALUMINUM ARMOR THHN/THWN-2 INNERS

MC-SG (SMARTGROUND™) STEEL ARMOR THHN/THWN-2 INNERS

Available in sizes 14 AWG through 10 AWG. Encore’s Metal Clad Cable is constructed with soft-drawn copper, Type THHN/ THWN-2 conductors rated 90°C dry. All conductors are individually wrapped with flame retardant colored protective paper with print legend and cabled together to form the cable core. The bare aluminum grounding/bonding conductor is located outside the paper wrap and is cabled with the insulated conductors and in constant contact with sheathing. Interlocked steel armor is applied over the entire assembly.

MC HCF-SG ALUMINUM ARMOR THHN/THWN-2 INNERS

Available in sizes 12 AWG through 10 AWG. Encore’s Metal Clad Cable is constructed with soft-drawn copper, Type THHN/THWN conductors rated 90°C dry. All conductors are individually wrapped with flame retardant colored protective paper with print legend and cabled together to form the cable core. Includes green ground same size as circuit conductors. The bare aluminum ground- ing/bonding conductor is located outside the paper wrap and is cabled with the insulated conductors and in constant contact with sheathing. Interlocked aluminum armor is applied over the entire assembly.

MC HCF-SG STEEL ARMOR THHN-THWN-2 INNERS

Available in sizes 12 AWG through 10 AWG. Encore’s Metal Clad Cable is constructed with soft-drawn copper, Type THHN/THWN conductors rated 90°C dry. All conductors are individually wrapped with flame retardant colored protective paper with print legend and cabled together to form the cable core. Includes green ground same size as circuit conductors. The bare aluminum grounding/bonding conductor is located outside the paper wrap and is cabled with the insulated conductors and in constant contact with sheathing. Interlocked steel armor is applied over the entire assembly.

MC-FPLP PLENUM RATED LIMITED POWER TYPE FIRE ALARM & CONTROL CABLE

MC ISOLATED GROUND ALUMINUM ARMOR THHN/THWN-2 INNERS

MC OVERSIZED NEUTRAL ALUMINUM ARMOR THHN/THWN-2 INNERS

MC MULTIPLE NEUTRAL ALUMINUM ARMOR THHN/THWN-2 INNERS

MC MULTIPLE NEUTRAL STEEL ARMOR THHN/THWN-2 INNERS

MC MUTLI-CIRCUIT ALUMINUM ARMOR THHN/THWN-2 INNERS

Available in sizes 12 AWG and 10 AWG with an insulated green ground conductor. Encore Wire Metal Clad Cable is constructed with soft-drawn copper, Type THHN/THWN-2 conductors rated 90°C dry locations. All conductors are cabled together with a separator tape containing the identification print legend to form the cable core. Interlocked aluminum armor is applied over the entire assembly.

AC ALUMINUM ARMOR THHN/THWN-2 INNERS

AC STEEL ARMOR THHN/THWN-2 INNERS

AC-HCF ALUMINUM ARMOR THHN/THWN-2 INNERS

Encore’s Armored Cable is constructed with soft-drawn copper, Type THHN conductors. Each insulated conductor is individually wrapped with a moisture-resistant paper covering which has flame retardant properties. These conductors, including a green insulated grounding conductor, are cabled together to form the cable core. A 16 AWG solid aluminum bond wire is placed longitudinally underneath the armor and remains in contact with the armor throughout the entire length. Interlocked aluminum armor is applied over the entire assembly.

AC-HCF STEEL ARMOR THHN/THWN-2 INNERS

PVC JACKETED MC ALUMINUM ARMOR THHN/THWN-2 INNERS

PVC JACKETED MC STEEL ARMOR THHN/THWN-2 INNERS

Available in sizes 14 AWG through 750 KCMIL, Encore’s Metal-Clad Cable is constructed with soft-drawn copper, Type THHN/THWN-2 conductors rated 90°C dry or wet locations. Sizes 14 AWG through 1 AWG contain a green insulated grounding conductor. Larger sizes are supplied with a bare ground conductor. All conductors are cabled together with separator tape containing the identification print legend to form the cable core. Galvanized steel armor is applied over the entire assembly. A flame retardant, sunlight-resistant black PVC jacket is applied over the armor.

PVC JACKETED MC ALUMINUM ARMOR XHHW-2 INNERS

Type MC cable shall be permitted as follows:
• Permitted use for services, feeders, and branch circuits in industrial, commercial, and multi-residential buildings
• Acceptable for power, lighting, control, and signal circuits
• Utilized for indoor or outdoor applications
• Allowable in concealed or exposed systems
• Permitted in wet locations per NEC 330.10(A)(11)(a)
• Permitted for direct burial in the earth or embedded in concrete per NEC 330.12(2)(a)
• Acceptable for direct burial where identified for such use
• Allowable in assembly occupancies (NEC 518.4)
• Permissible in theaters, audience areas of motion pictures, television studios, and similar locations (NEC 520.5)
• Permitted as aerial cable on a messenger
• Allowable installations in approved raceways and cable trays (NEC 392)
• Suitable for installation under raised floors for IT equipment (NEC 645.5)
• Permitted in Class I Div. 2, Class II Div.2, and Class III Div. 1 Hazardous Locations
• Listed for use in UL 1, 2, and 3 Hour Through-Penetration Firestop Systems

PVC JACKETED MC STEEL ARMOR XHHW-2 INNERS

Available in sizes 14 AWG through 750 KCMIL, Encore’s Metal Clad Cable is constructed with soft-drawn copper. Type XHHW-2 conductors rated for wet or dry locations at temperatures not to exceed 90oC. Sizes 14 AWG through 1 AWG contain a green insulated grounding conductor. All conductors are cabled together with separator tape containing the identification print legend to form the cable core. Interlocked aluminum armor is applied over the entire assembly. A flame retardant sunlight resistant black PVC jacket applied over the armor. Additional jacket colors are available upon request.