UNDERGROUND DISTRIBUTION SINGLE-RATED CABLE 1350 SERIES 600V
Single-rated XLPE insulated cables for underground service entrance applications not exceeding 600 volts. May be used as single-rated type USE-2 for NEC® applications as well as non-NEC applications including direct burial, or for installation in ducts or conduits.
UNDERGROUND DISTRIBUTION TRIPLE-RATED CABLE AA-8000 SERIES 600V
Triple-rated USE-2/RHH/RHW-2 conductors are suitable for underground service entrance applications and additionally for applications in raceways for general purpose lighting and power circuits. Triple-rated conductors are additionally suitable for installation on both sides of the service point, and when the service point is located inside building envelope.
Quadraplexed type USE-2/RHH/RHW-2 with Compact Stranded Aluminum Alloy 8000 Series conductors per ASTM B800, B801, and B836. Suitable for electrical connections in mobile homes for permanent wiring according to the 2008 NEC®.
Stranded, Concentric-Lay Aluminum Conductors, 1350 Series Alloy per ASTM B231.
Suitable for overhead transmission and distribution applications that do not require the rated strength of ACSR type neutrals. Encore’s AAC overhead neutrals include Class AA for bare conductors usually used in overhead lines, and/or Class A for conductors to be covered with weather-resistant materials. Class A also for bare conductors where greater flexibility is required.
Stranded, Concentric-Lay Aluminum 1350 Series Conductors with Steel Support Center Wire(s) per ASTM B232.
Suitable for overhead transmission and distribution applications that require rated strengths for steel support. Encore’s ACSR overhead neutrals include Class AA for bare conductors commonly used in overhead lines, and/or Class A for conductors to be covered with weather-resistant materials.
Stranded, Concentric-Lay Aluminum Alloy 6201 Conductors per ASTM B399.
Suitable for overhead transmission and distribution applications that require rated strengths for 6201 alloy at a T81 temper. Encore’s AAAC overhead neutrals include Class AA for bare conductors usually used in overhead lines, and/or Class A for conductors to be covered with weather-resistant materials.
